BRP ROTAX 916 i A Series User Manual

Manifold pressure
Parameter Min. Max.
Manifold pressure 60 hPa
(1.77 in. HG)
1800 hPa
(53.15 in. HG)
NOTE
Target pressure at a temperature from 25 °C (77 °F) to
35 °C (95 °F):
5800 rpm 1690 mbar
5500 rpm 1480 mbar
1750 mbar is the “not to exceed” value which is needed by the
boost pressure control in special situations.
Boost pressure
NOTE
A boost pressure peak of max. 1990 hPa (58.76 in. HG) at en-
gine speed of 6500 rpm must not exceed a duration of 3
seconds.
Parameter Min. Max.
Boost pressure ambient pressure 1800 hPa
(53.15 in. HG)
Oil pressure
Parameter Max.
Normal operating rage above
3500 rpm
2.0 to 5.0 bar (29 – 72.5 psi)
Minimum below 3500 rpm 0.8 bar (11.6 psi)
At cold start and warming up peri-
od (maximum)
7.0 bar (101.5 psi)
Oil temperature
Parameter Min. Max.
Engine start -20 °C (-4 °F)
–
Take-off 50 °C (122 °F)
–
Normal operation 50 °C (122 °F) 120 °C (248 °F)
Page 2-4
December 01 2023
BRP-Rotax Effectivity: 916 i A / C24
Edition 0 / Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English