BRP ROTAX 916 i A Series User Manual

Step Step Description Procedure
NOTE
After the voltage drop between Terminal 2 and
Terminal 10 changes back to 0 V wait approx. 3
seconds until continuing with the next step.
Example (Symbolic) Warning Lamp B: Check
11 Reduce Throttle
Valve as required.
Set linearized throttle position
to reach an engine speed of
2000 rpm and continue with
wastegate and PCV check.
Example (Symbolic) Set Throttle
NOTE
Lane A and Lane B have different sensor inputs. During Lane
and Ignition check, some sensor values are not displayed, de-
pending on the activation of the Lanes
Following sensor values are not available if Lane A is turned
OFF and Lane B is activated:
• Coolant temperature
• Exhaust gas temperatures from cyl. 1-4
• Ambient temperature
• Throttle lever position
Following sensor values are not available if Lane B is turned
OFF and Lane A is activated:
• Oil temperature
• Oil pressure
Page 4-16
December 01 2023
BRP-Rotax Effectivity: 916 i A / C24
Edition 0 / Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English