To Next PageTo Next Page
Need help?Do you have a question about the BRP SEA-DOO GTX LTD iS 255 and is the answer not in the manual?
General| Manufacturer | BRP |
|---|---|
| Model | SEA-DOO GTX LTD iS 255 |
| Year | 2009 |
| Displacement | 1494 cc |
| Horsepower | 255 hp |
| Rider Capacity | 3 |
| Seating Capacity | 3 |
| Suspension | Intelligent Suspension (iS) |
| Category | Personal Watercraft |
| Fuel Capacity | 70 L |
| Oil Capacity | 3 liters |
| Length | 139 inches |
| Width | 48 inches |
| Braking System | Intelligent Brake and Reverse (iBR) |
| Height | 45.1 inches (115 cm) |
| Top Speed | 65 mph (105 km/h) |
Procedure for safely removing the protective crate cover from the vehicle.
Instructions for initial vehicle setup after uncrating.
How to release the tensioned moving deck suspension.
Steps for installing the battery and connecting its cables.
Guidelines for activating and charging the battery before installation.
Instructions for correctly installing the boarding step.
Procedure for installing the steering column assembly.
Steps for installing the steering cable component.
Overview of fluid checks and factory fill status.
Procedure for checking fuel lines and adding fuel.
Steps to check and maintain the engine oil level.
Procedure to check and adjust engine coolant level.
Steps to establish a connection between a PC and the vehicle.
Guide to operating the BUDS software for diagnostics.
Procedure for programming and managing DESS keys.
How to unlock the iS suspension system using BUDS.
Proper procedure for closing a BUDS session.
Detailed steps for adjusting the vehicle's steering alignment.
Performing a test ride to verify all systems are operational.
Instructions for removing protective films and bar code decals.
Guidelines for cleaning and polishing the watercraft.
Steps for delivering the watercraft to the customer.
