Need help?Do you have a question about the BRUEL & KJAER 2245 and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Weighting Networks | A, C, Z |
| Microphone | Prepolarized Free-field 1/2" Microphone |
| Standards | IEC 61672-1 |
| Data Storage | Internal memory |
| Display | Color LCD |
| Battery | Lithium-Ion |
| Time Weighting | Fast, Slow, Impulse |
| Detector | RMS |
| Operating Temperature | -10°C to +50°C |
| Power Supply | external power supply |
Instructions for switching the meter on/off and initial setup.
Configuring measurement parameters like input, control, broadband, and spectrum.
Viewing calibration history, status, and performing acoustic calibration procedures.
Starting, pausing, stopping measurements, and viewing results including overload/underrange.
Measuring low-level sounds, static pressure, vibration, and frequency weightings.
Addresses calibration requirements for pattern evaluation and periodic tests.
Explains how to use and calibrate the electrical substitute for microphones.
Introduces procedures for EMC (Electromagnetic Compatibility) testing.
Details normal operating modes for emission and immunity testing.
Provides specifications for the Type 4966 microphone, including sensitivity and capacitance.
Describes how directional responses and sensitivity variations are presented.
Details maximum, typical broadband noise, and noise spectra.
Details maximum sound level, total range, primary indicator, indicator, linearity, pulse, operating, and peak ranges.
Covers spectrum analysis, 1/1-octave, and 1/3-octave band frequencies.
Explains digital interfaces, charge/power interface, external adapter, and battery.
Directional responses normalized to reference, including sensitivity variations.
Provides correction data for acoustical tests with a calibrator.
To Next Page
