Sound Level Meters are often used for
monitoring in remote places, and you
may want to “monitor the monitor” or
transfer measured data to your home-
base PC, without going to the measure-
ment site. A telephone connection —
wired or wireless — is a convenient way
to transfer measurement data. And mo-
dems are a vital link in the chain of trans-
mission. This application note explains
what equipment you need and how to
use it.
Please note that only Brüel&Kjær Types
2236 and 2260 are supported for modem
connection. Types 2231, 2237 and 4436
need special handshaking modes, which
cannot be activated via modem.
APPLICATION NOTE
Using Modems with Sound Level Meters
To Next Page
