Need help?Do you have a question about the BRUEL & KJAER Mediator 2238 and is the answer not in the manual?
General| Type | Sound Level Meter |
|---|---|
| Frequency Range | 10 Hz to 20 kHz |
| Measurement Channels | 1 |
| Input Type | Microphone |
| Operating System | Proprietary |
| Display | LCD |
| Weighting Networks | A, C, Z |
| Data Storage | Internal memory |
| Power Supply | Batteries |
| Connectivity | RS-232 |
| Microphone | 1/2" Free-field Microphone |
| Standards | ANSI S1.4 Type 1 |
| Time Weighting | Fast, Slow |
| Operating Temperature | -10°C to +50°C |
| Humidity Range | 0% to 90% RH (non-condensing) |
| Storage Temperature | -25°C to +70°C |
Overview of the manual's content and structure, including its scope.
Explains conventions for pushkeys, soft keys, parameter text, and sockets.
Details the block diagram and functional components of the Mediator's detectors.
Covers statistics, back-erase, measurement sequences, and auxiliary ports.
Lists and describes the items available in the Measurement Set-up menu.
Introduces parameters and their naming conventions in the Enhanced module.
Explains the primary function of each pushkey on the sound level meter.
Details essential pushkey functions like Power, Calibrate, System, Data Files, and Set-up.
Describes functions of Range, Reset, Meas. Results, Pause/Continue, and Select.
Highlights specific pushkey functions like Cancel, Backlight, and Enhanced module additions.
Explains how to set up measurement parameters specific to the Enhanced module.
Shows the menu items for the Enhanced SLM Software BZ7125.
Guides on setting frequency weightings for detectors 1 and 2.
Explains configuring percentile levels and time weighting for statistics.
Details setting up and managing Measurement Sequences.
Explains configuring the Aux 1 and Aux 2 input/output sockets.
Describes the back-erase function to delete recent measurement data.
Guides on configuring auto-start functions for measurements.
Explains selecting measurement parameters for printing.
Lists components of a basic measurement data file.
Details types of set-up data included in measurements.
Lists measurement data, including overall and specific parameter results.
Describes level and cumulative distribution statistics.
Lists available measurement parameters and their details.
Provides a table of default parameter settings for the Enhanced module.
Lists interface error messages and their descriptions.
Explains how to control the Mediator using a serial interface.
Lists command and query messages for serial interface control.
Details the command for setting frequency weighting for Detector 2.
Explains the query for checking measurement parameters via serial interface.
Describes commands for setting measurement parameters via serial interface.
To Next Page
