Brunetti MC2 MASTER COMBO - Technical Specifications and Equipment; Channel EQ and Functionality Specs; Foot Pedal and Electric Connection

CONGRATULATION FOR YOUR CHOICE!
TECHNICAL SPECIFICATIONS
- All tube path signal
- External speaker connection
- Three band equalization
- Pre - Gain and Bright Eq. for the Clean Channel
- Separated post Gain and Master Eq. for the Crunch/Lead channels
- Spring reverb (Accutronics) with buffered solid state amplifier
- Spring reverb separated controls for all the channels
- EDG function with all tube ''Harmonic Shape Mirror''
- ''All access'' foot pedal microprocessor controlled for channel switching, REVERB and EDGE function
- Output Power: 60W rms
- Channels: 3 (Clean, Crunch, Lead)
- Power Supply: See label on the rear panel
- Parallel spring reverb (Accutronics) with Mute / Clean / Crunch / Lead controls
- Serial/Parallel loop effects
- Tubes: 4 x 12AX7 - 2 x EL34
- Speaker: 1 x 12'' Jensen Custom
- Dimensions: 580 x 290 x 530 mm.
- Weight: 22Kg.
EQUIPMENT
- Power cable
- Foot pedal with cable
- Instruction manual
- Warranty Card
- Cover
ELECTRIC CONNECTION
-Electric safety and correct work are guarantee when the unit is correctly earthed.
-Ensure that voltage value printed on the rear panel correspond to available current.