Important Safeguards
CAUTION
Power Cord Maintenance
WARNING
Please ensure your hands are dry and clean before touching or using the power cord and
plug.
Do not damage the power cord, connector or plug.
Do not use the power cord if the plug or the connector itself is damaged.
Before plugging in the socket, please ensure the used voltage is in line with the voltage
indicated by the product.
Always untie the power cord before use.
Do not use a loosened or damaged socket.
Do not spillage the liquid on the connector.
Avoid damaging, modifying or placing it close to high heat. Avoid twisting, pulling or placing
heavy objects on it. Damaged power cords will cause electrocution, short-circuiting or fires.
When abnormalities occur during usage such as malfunctioning, please stop usage
immediately, switch it off and unplug.
If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent.
Please ensure the plug is fully installed properly to avoid electrocutions or fires.
Please do not plug your appliance into any socket other than directly into the standard
10A socket. Do not use of the appliance with extenders, multi plugs, or voltage converters
to prevent electrocutions or fires.
Before cleaning, please turn off and unplug the appliance. If not, injuries, burns,
electrocution or fires may occur.
Please wipe clean and dust your appliance regularly to avoid the build-up of dirt.
Only use with 220-240V. If used with the wrong voltage, resulting in damage and the warranty is voided
immediately
Do not use the product overseas.
Do not use next to the wall or furniture. Please maintain good ventilation to dissipate
heat during usage.
To Next Page
Loading...