Why does the Bruno Curb-Sider VSL-6000 Automobile Accessories lift belt go down when UP pendant switch is pressed?
This issue occurs if the lift has been run down too far, causing the belt to wrap backwards around the spool. To correct this, run the lift down until the belt wraps correctly onto the spool.
General| Model | VSL-6000 |
|---|---|
| Category | Automobile Accessories |
| Lift Range | Up to 30 inches |
| Installation | Professional installation recommended |
| Material | Steel |
| Type | Vehicle Lift |
| Lifting Capacity | 400 lbs |
| Weight Capacity | 400 lbs |
| Power Source | 12V DC |
| Operation | Powered |
| Vehicle Type | SUVs, Vans |
| Mobility Device Type | Scooters |
| Mounting | Inside Vehicle |
| Warranty | 3-year limited warranty |
Read vehicle manufacturer instructions on electrical systems before working on the vehicle to avoid damage.
Maximum load rating is affected by application factors and vehicle condition.
This lift fulfills requirements according to EMC 95/54/EC, 2004/108/EC.
Mobility device wheels rolling off raised surfaces during loading can cause injury or damage.
Tips for safely transferring mobility devices to sidewalks and guiding them during operation.
Instructions for operating the lift arm and attaching the pick-up device to the docking mechanism.
Steps for retracting the lift arm and lowering the mobility device into the vehicle.
Ensuring correct placement, stability, and securing the unit after operating the lift.
Procedure for installing the optional fold-down quick release pin kit by replacing a bolt with pins.
Instructions on how to fold down the lift head using the quick release pins.
Procedure for accessing the emergency hand crank and maneuvering the lift during a power failure.
List of recommended maintenance tasks for the lift.
Identifies common lift problems and their possible causes and solutions.
To Next Page