Why does the Bruno Curb-Sider VSL-6900 lift belt go down when UP pendant switch is pressed?
This issue occurs if the lift has been run down too far, causing the belt to wrap backwards around the spool. To correct this, run the lift down until the belt wraps correctly onto the spool.
Important warnings regarding vehicle electrical systems when working on the vehicle.
Park vehicle, check space, and prepare mobility device for loading.
Safety warning about mobility device wheels rolling off raised surfaces during loading.
Instructions to remove the cover and access the emergency hand crank.
Slide cover and rotate to access the base motor and locate the emergency crank.
Place crank on motor shaft and rotate to return lift to home position.
General| Brand | Bruno |
|---|---|
| Model | Curb-Sider VSL-6900 |
| Category | Automobile Accessories |
| Language | English |
To Next Page