Need help?Do you have a question about the Bruno ELECTRA-RIDE II and is the answer not in the manual?
General| Weight Capacity | 300 lbs |
|---|---|
| Seat Depth | 15 inches |
| Rail Length | Customizable |
| Footrest Width | 12 inches |
| Speed | 20 feet per minute |
| Safety Features | Seat belt, obstruction sensors, swivel seat |
| Seat Type | Padded |
| Footrest | Folding |
| Battery Life | Multiple trips during power outage |
| Warranty | 2 years |
Explains warranty voidance if installed by unauthorized personnel.
Product compliance with CSA and ANSI/UL Standards for North America.
How to obtain material safety data sheets for unit components.
Lists components included in the carriage box for the stairlift.
Lists components included in the installation box for the stairlift.
Lists components included in the seat box for the stairlift.
Lists components included in the rail box for the stairlift.
Components for the rail box, including the joint plate.
Comprehensive list of tools needed for stairlift installation.
General assembly steps for residential and commercial units.
Instructions for attaching the lower bumper bracket to the rail.
Steps for measuring and fitting the stairlift rail to the staircase.
Guide to determining the correct staircase angle for installation.
Process for defining stairway dimensions and details for installation.
Selection criteria for chair upholstery, hand orientation, and rail.
Procedure for calculating and determining the stairlift rail length.
Application details and seat height charts for the SRE-1550.
Instructions and safety notes for cutting the stairlift rail.
Steps for securely assembling the stairlift rail joint.
Guidelines for positioning and installing stairlift foot clamp assemblies.
Procedure for mounting the stairlift carriage onto the upper rail.
Steps to adjust and level the stairlift carriage angle.
Instructions for installing the upper bumper bracket to the rail.
Connecting the battery charger and routing its wiring harness.
Steps for feeding wires and mounting the seat frame post.
Procedure for connecting wires and attaching the footrest assembly.
Verifying correct operation of footrest and carriage safety switches.
How to fold, unfold, and rotate the seat and arms.
Steps for adjusting the stairlift arm width and position.
Mounting ramp and adjusting limit switches for charging.
Overview of the infrared call/send system for residential use.
Instructions for mounting the standard infrared call/send transmitter.
Procedure for testing residential call/send transmitters.
Steps for installing commercial key-controlled call/send transmitters.
Explanation of the four diagnostic modes for the circuit board.
How to change the circuit board diagnostic mode using DIP switches.
Explains the meaning of LED indicators on the battery charger.
Procedure for replacing the fuse in the battery charger.
Steps for relearning the remote infrared transmitter to the unit.
Explains the circuit breaker's role and troubleshooting for tripped breakers.
Steps to prepare the rail and gear rack before applying lubrication.
Comprehensive steps to test elevator speed, direction, and safety features.
Instructions for reconfiguring controls between right and left armrests.
How to align the overspeed cam with the housing before carriage installation.
Steps to reset the overspeed mechanism if it has been tripped.
Guide to adjusting the stairlift's speed using the potentiometer.
Instructions for adjusting the seat height of the stairlift.
Recommended annual maintenance tasks for the stairlift.
Important considerations when replacing the stairlift belt.
Common causes and solutions when the stairlift unit does not operate.
Troubleshooting steps for slow operation or lack of power.
Resolving issues with reversed controls or inconsistent speed.
Diagnosing and fixing erratic operation with remote transmitters.
Troubleshooting erratic operation using the armrest-mounted control.
Explains why the seat must be positioned correctly for operation.
Solutions for when the stairlift does not operate with the remote control.
Troubleshooting when the unit does not stop at the rail bumper.
Addressing issues causing a rough or chattering ride experience.
Detailed breakdown of the components for the SRE-1550 carriage base.
Exploded view and bill of materials for the adjustable clamp set.
To Next Page
