Bruno SOFA - Chaise Longue Assembly; Tools and Screws for Chaise Longue; Unpacking and Feet Assembly for Chaise Longue

4746
TOOLS AND SCREWS
MOUNTING AND ATTACHING OF
THE CHAISE LONGUE
Included in the delivery are:
Two people are needed for the assembly. The duration of the assembly is about 20–30
minutes and no manual skills are necessary. Assemble the sofa in the room where you wish
for it to remain. Assemble the sofa on a clean and soft surface.
4 x Felt platelets for the wooden
or metal feet
1 x Ratchet with matching
bit attachment
2 x Adapter for the armrest
assembly
1 x Allen key
2 x Metal feet
2 x Wooden feet
4 x Screws A with washers
for the assembly of the
metal feet
4 x Screws B for the assembly
of the armrest
A
B
4 x Screws C for the assembly of
the chaise longue to the sofa
(only necessary if you add a
chaise longue to an existing
Bruno sofa bed)
Assemble your Bruno sofa bed as described,
but only attach one armrest.
Note: the chaise longue can be assembled
on both sides.
Please remove the foil and cardboard from
your chaise longue.
In twos turn the chaise longue to the side to
attach the four legs.
The rear legs are pre-assembled. For the
wooden feet version, insert two front
wooden legs into the outer holes. For the
metal feet version, attach the two metal
feet at the front using the provided screws
A. Apply the felt platelets to the bottom
of the feet and set up the chaise longue in
twos.
UNPACKING OF THE CHAISE LONGUE
& ASSEMBLY OF THE FEET
1. 2.
3A.
3B.