Bruno SOFA - Adding Chaise Longue to Existing Sofa; Assembly for Existing Sofa Bed

5150
Fold back the opened sofa bed in twos to
gain access to the front holes of the side
slats.
Here as well, push the screws through the
holes from the inside and connect them
with the sleeve nut.
7A. 7B.
Move the open chaise longue towards the
folded-out sofa bed.
If you already own a Bruno sofa bed and are adding the chaise longue to it, please follow
the steps below:
Push the screws C from the inside through
the holes and connect them with the sleeve
nut. Please use the ratchet for screwing and
the enclosed Allen key to counteract.
6A. 6B.
ASSEMBLY OF THE CHAISE LONGUE TO AN
EXISTING BRUNO SOFA BED