Brunton Sherpa User Manual

2
Introduction 2
Barometer/Time 4
Resetting the air pressure development display Set mode 5
Setting the barometer Set mode 6
Altering air-pressure measurement in QFE or QNH Set mode 6
Setting the time Option mode 7
Altimeter 7
Setting the altitude Set mode 8
Calibrating the pressure sensor Option mode 9
Windspeed indicator 10
Resetting the peak speed and the mean values Set mode 12
Setting the calculation time for the mean values Option mode 12
Calibrating the wind-vane sensor Option mode 13
Selecting the mean-value display or the peak mean-value display Option mode 14
Temperature display 14
Resetting the windchill display Set mode 15
Calibrating the temperature sensor Option mode 15
Technical specifications 16
SHERPA – Operating Instructions
Contents

Brunton Sherpa Specifications

General

Brand	Brunton
Model	Sherpa
Category	Measuring Instruments
Language	English