Brute 74003 User Manual

Air Compressor
Operator’s Manual / Manual del Operario
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON,WISCONSIN, U.S.A.
Manual No. 201303GS
Revision E (10/24/2007)
WARNING
Failure to read and follow the Operator’s Manual
and all operating instructions can result in death,
bodily injury, and/or property damage.
Save this manual for future reference.
ADVERTENCIA
Si no se leen y siguen las indicaciones del Manual del
Operario y todas las instrucciones de uso, se pueden
producir daños materiales, lesiones o incluso la muerte.
Guarde este manual para futuras consultas.
DO NOT RETURN TO THE STORE NO NECESITA VOLVER A LA TIENDA
Questions? Need help? Before returning this product for any reason
please contact us at:
¿Tiene preguntas? ¿Necesita ayuda? Antes de devolver el producto
por cualquier razón, póngase en contacto con nosotros:
1-800-743-4115 www.brutepower.com
STOP
Models / Modelos
074003 & 074004

Brute 74003 Specifications

General

Power Source	Electric
Maximum Pressure	150 PSI
Horsepower	1.5 HP
Max PSI	150 PSI
Voltage	120 V
Pump Type	Oil-Free
Noise Level	78 dB
Amperage	15 Amps

Summary

Safety Rules and Information

Equipment Description

Details compressor, features, and operating parameters.

Statement of Use

Outlines intended use for light-duty tools and operating temperature.

Hazard Symbols and Meanings

Explains hazard symbols and signal words for safety.

General Safety Warnings

Compressed Air & Hot Surface Hazards

Operational Notices

Notices on break-in and oil checks.

Assembly Procedures

Carton Contents

Lists all items in packaging.

Unpacking Instructions

Instructions on how to unpack the compressor.

Air Filter Installation

Step-by-step guide for installing the air filter.

Wheel Kit Installation

Instructions for assembling the wheel kit.

Wheel Kit Assembly Details

Adding Compressor Oil

Guide on checking and adding oil.

Features and Controls Overview

Component Identification

Identifies and describes main parts and controls.

Additional Component Descriptions

Lists and explains other important components.

Operation Guide

Break-In Procedure

Step-by-step guide for initial break-in operation.

Operating Location and Grounding

Starting and Stopping the Compressor

Extension Cord Guidelines

Recommendations for using extension cords.

Compressor Operation and Safety

Product Specifications

Technical Data Summary

Lists key specs like frequency, voltage, capacity, delivery.

Maintenance Procedures

Maintenance Schedule Overview

Outlines a routine schedule with service intervals.

Safety Valve and Fittings Check

Unit Cleaning Guide

Weekly or daily cleaning procedures.

Air Filter Check and Cleaning

Pump Oil Change Procedure

Steps for draining and replacing compressor pump oil.

Maintenance and Storage

Internal Valve and Label Checks

Annual inspection of valves and safety labels.

Overload Protection Reset

How to reset the motor's overload protection.

Storage Preparation

Pre-Storage Procedures

Steps to perform before storing the compressor.

Troubleshooting Guide

Before You Call for Assistance

Advice on information for customer support.

Excessive Tank Pressure Issues

Troubleshooting for safety valve popping off.

Air Leak Identification

Identifies causes and solutions for air leaks.

Insufficient Air Supply Diagnosis

Motor Not Running Troubleshooting

Troubleshooting for when the motor fails to start.

Glossary of Terms

Technical Term Definitions

Definitions of common terms used in the manual.

Limited Warranty Information

Warranty Period Details

Specifies warranty duration for consumer and commercial use.

Warranty Coverage and Exclusions

Details warranty coverage, exclusions, and service terms.