Brute 7800583 - Assembling the Grass Bag

www.brutepower.com8
Assembling the Grass Bag (Not All Models)
Note: On some models, the side mounted discharge deflector is
temporarily attached (for shipping purposes) to the rear of the
mower. Before assembly of the grass bag, remove the side mounted
discharge deflector.
1. Slide the frame assembly (A, Figure 7) into the grass
bag (B). Make sure the handle (C) is on the outside of
the grass bag.
2. First, attach the clips (A, Figure 8) to the side of the
frame assembly. Next, attach the clips to the top and
bottom of the frame assembly.
C
Figure 7: Installing the frame assembly
A
Figure 8: Installing the bag clips
Assembly
B
A
Not for
Reproduction