Brute Pressure Washer User Manual

Manual No. 201906GS Revision C (07/31/2007)
BRIGGS & STRATTON POWER PRODUCTS GROUP, LLC
JEFFERSON, WISCONSIN, U.S.A.
2000 PSI Pressure Washer
Operator’s Manual

Brute Pressure Washer Specifications

General

Operating Pressure	3200 PSI
Flow Rate	2.5 GPM
Engine Displacement	196cc
Maximum Pressure	3200 PSI
Water Flow	2.5 GPM
Hose Length	25 ft
Weight	65 lbs

Summary

Operator Safety

Equipment Description

Describes the pressure washer's features and specifications.

Safety Rules and Hazard Alerts

Outlines critical safety warnings, hazard symbols, and general rules for safe operation.

Operator Safety

Carbon Monoxide and Fuel Hazards

Details dangers of carbon monoxide exhaust and fuel flammability and explosion risks.

Operational Hazards

Covers risks of slippery surfaces, kickback, and electrocution during operation.

Operator Safety

Kickback, Heat, and Pressure Hazards

Warns about starter cord kickback, muffler heat burns, and high-pressure stream dangers.

Sparking and General Safety

Alerts to fire/shock risks from sparking and general safety precautions.

Operator Safety

Rotating Parts and Eye Injury Risks

Covers hazards from rotating parts and eye injury from spray, plus operational notices.

Operational Notices

Provides notices on proper use and maintenance to avoid equipment damage.

Assembly Instructions

Unpacking and Contents Check

Instructions for unpacking the pressure washer and verifying all included items.

Attaching the Handle

Step-by-step guide to securely attach the handle to the main unit.

Assembly Instructions

Adding Engine Oil and Fuel

Procedures for correctly filling the engine oil and fuel tank.

High Altitude Operation

Guidance for operating the pressure washer effectively at high altitudes.

Assembly Instructions

Connecting Hoses and Water Supply

Steps for connecting the high-pressure hose, garden hose, and water supply to the pump.

Pre-Operation Checklist

A checklist to ensure all assembly and setup steps are completed before starting the engine.

Features and Controls Overview

Component Identification

Identifies and describes the main parts, controls, and features of the pressure washer.

Operation Guide

Pressure Washer Location and Air Movement

Guidelines for safe placement and ventilation requirements for operation.

Operation Guide

Starting the Pressure Washer

Step-by-step instructions for starting the engine for the first time and for subsequent uses.

Operation Guide

Stopping the Pressure Washer

Procedures for safely shutting down and stopping the engine and releasing pressure.

Operation Guide

Using the Adjustable Nozzle

How to adjust the spray pattern and switch between high and low pressure modes.

Applying Detergents

Steps for applying cleaning detergents using the low-pressure detergent siphoning system.

Operation Guide

Rinsing and Cleaning Procedures

Instructions for rinsing surfaces and cleaning the detergent siphoning tube.

Automatic Cool Down System

Explains the function of the thermal relief system in protecting the pump.

Maintenance Schedule and Recommendations

Scheduled Maintenance Tasks

Provides a schedule for regular maintenance based on operating hours or calendar intervals.

General Maintenance Advice

Offers general recommendations for maintaining performance and warranty.

Pump and Emissions Information

Notes on pump oil requirements and emissions control system maintenance.

Maintenance Schedule and Recommendations

Before Each Use Checks

Daily checks to perform before operating the pressure washer for safety and function.

Pressure Washer Component Checks

Inspecting debris, inlet screen, hoses, gun, and nozzle extension for damage or leaks.

Nozzle Maintenance

Instructions for cleaning a clogged nozzle orifice to resolve pressure issues.

Maintenance Schedule and Recommendations

O-Ring and Engine Oil Maintenance

Information on O-ring kits and selecting the correct engine oil viscosity for various temperatures.

Maintenance Schedule and Recommendations

Engine Oil Level and Changes

Procedures for checking the engine oil level, adding oil, and changing the engine oil.

Air Cleaner Service

How to clean or replace the air cleaner for optimal engine performance and longevity.

Maintenance Schedule and Recommendations

Spark Plug and Spark Arrester Service

Guidance on replacing the spark plug and servicing the spark arrester for reliable engine starting.

Cooling System and Combustion Chamber

Importance of cooling fins and recommendations for combustion chamber cleaning.

Maintenance Schedule and Recommendations

After Each Use Procedures

Steps to flush the system, disconnect hoses, and prepare for storage after each use.

Maintenance Schedule and Recommendations

Winter and Long Term Storage

Instructions to protect the unit from freezing temperatures and for extended storage periods.

Fuel System and Pump Protection

How to treat the fuel system with stabilizer and protect the pump for storage.

Troubleshooting Common Problems

Pump Performance Issues

Lists common pump problems like low pressure or chattering, and their corrections.

Engine and Detergent Problems

Troubleshooting for detergent mixing, engine bogging, starting, and power issues.

Warranty Information

Emissions Control System Warranty

Details the warranty coverage for emissions control components and owner responsibilities.

Warranty Information

Warranty Coverage and Exclusions

Specifies warranty duration, claims process, and general exclusions.

Emission Compliance Information

Information on emission standards and durability periods for engines.

Limited Warranty Policy

Warranty Period and Service

Defines warranty duration for consumer/commercial use and general warranty service information.

Product Specifications

Common Service Parts

Lists common parts and their part numbers for service and replacement.