Bryant 17
Section 4 — Service
Bryant Air-cooled 7 kW, 12 kW and 15 kW Generators
4.1 SERVICE SCHEDULE
ATTENTION: It is recommended that all service work
be performed by the nearest Bryant Dealer.
SYSTEM/COMPONENT PROCEDURE FREQUENCY
X = Action Inspect Change Clean W = Weekly
R = Replace as Necessary M = Monthly
* = Notify Dealer Y = Yearly
if Repair is Needed.
FUEL
Fuel lines and connections* XM
LUBRICATION
Oil level XM
Oil
X AFTER BREAK-IN,
AND Y
Oil filter X AFTER BREAK-IN,
AND Y
COOLING
Enclosure louvers
XXW
BATTERY
Remove corrosion, XXM
ensure dryness
Clean and tighten
XXM
battery terminals
Check charge state
X R EVERY 6 M
Electrolyte level X R EVERY 6 M
(unsealed batteries only)*
ENGINE AND MOUNTING
Air cleaner
XR Y
Spark plug(s) XR Y
GENERAL CONDITION
Vibration, Noise, Leakage, XM
Temperature*
COMPLETE TUNE-UP* TO BE COMPLETED BY A Y
BRYANT DEALER
SERVICE
To Next Page
Loading...
