© Bryant Heating & Cooling Systems 7310 W. Morris St. Indianapolis, IN 46231 Printed in U.S.A. edition date: 03/06 Catalog No. OM02-66
Manufacturer reserves the right to change, at any time, specifications or designs without notice and obligations Replaces: New
—4—
consult your installing contractor for proper intervals/proce-
dures for your geographic area or service contact.
UNIT SUPPORT
Your split-system outdoor unit should be maintained at a level
position. If its support should shift or settle so that the unit is
no longer level, you should correct the condition. Relevel it
promptly to assure water drains out of the unit. If you notice
that water or ice collects beneath the unit, arrange for it to be
drained away from the unit.
Heat pumps installed in snowbelt areas should be elevated with
support feet or a snow stand.
BEFORE YOU REQUEST A
“SERVICE CALL”
CHECK FOR THESE EASILY SOLVED
PROBLEMS:
• Check the indoor and outdoor disconnect switches. Verify
that circuit breakers are ON or that fuses have not blown.
• Check for sufficient airflow. Check the air filter(s) for any
accumulations of dirt. Check for blocked return-air or supply-
air registers. Be sure registers are open and unobstructed.
• Check the settings on your indoor thermostat. If you desire
cooling, make sure that the temperature control selector is set
below room temperature and the SYSTEM or MODE control
is set to COOL or AUTO. If you require warmth, make sure
that the temperature control selector is set above room temper-
ature and the SYSTEM or MODE control is set to HEAT or
AUTO. The FAN control should be set to ON for continuous
blower operation or AUTO if you wish blower to function only
while your heat pump is operating.
If your comfort system still fails to operate, turn your system
off and contact your servicing dealer for troubleshooting and
repairs. Specify your apparent problem, and state the model
and serial numbers of your equipment. (You should have them
recorded on the last page of this booklet.) With this informa-
tion, your dealer may be able to offer helpful suggestions over
the phone or save valuable time through knowledgeable prep-
aration for the service call.
REGULAR DEALER
MAINTENANCE
In addition to the routine mainte-
nance that you perform, your home
comfort system should be inspect-
ed regularly by a properly trained
service technician. The inspection
(preferably twice each year, but at
least once every year) should
include the following:
• Routine inspection of air filter(s). Replacement or cleaning
as required.
• Inspection and cleaning of the blower wheel, housing, and
motor as required.
• Inspection and, if required, cleaning of indoor and outdoor coils.
• Inspection of the indoor coil drain pan, plus the primary and
secondary drain lines. If supplied, the auxiliary drain pan and
line should be inspected at this time. Service should include
cleaning if required.
• A check of all electrical wiring and connections.
• A check for secure physical connections of individual com-
ponents within units.
• Operational check of the heat pump system to determine
actual working condition. Necessary repair and/or adjustment
should be performed at this time.
• Your servicing dealer may offer an economical service
contract that covers seasonal inspections. Ask for further
details.
FOR THE RECORD
Record the model, product, and serial numbers of your new
equipment. This information, along with the other ready-
reference facts requested will be necessary should you ever
require information or service.
Installation: Date______________ Dealer Name, Address, Phone_____________________________________________
Outdoor Unit Product No.__________ Model No._________________Serial No._________________________________
Indoor Unit Product No.__________ Model No._________________Serial No._________________________________
To Previous Page
Loading...
