12
TESTED AHRI COMBINATION RATINGS*
NOTE: Ratings contained in this document are subject to change at any time.
For AHRI ratings certificates, please refer to the AHRI directory www.ahridirectory.org
Additional ratings and system combinations can be accessed via the Bryant database at: http://cactaxcredits.info/bryant-ratings/hp_ratings_srch.php
Equipment performance calculator can be accessed at: http://rpmobbry.wrightsoft.com/
Model Number Coil Model Number Furnace Model Number
Cooling
Capacity
Cooling Heating
EER SEER
ID CFM High Temp
HSPF
Low Temp
High Low
Capacity
47˚F(8˚C)
COP
Capacity
17˚F ( --- 8 ˚C)
COP
226ANA024****B FV4CNF002 24,000 13.0 17.0 700 560 25,000 3.90 9.0 15,300 2.74
226ANA036****B FV4CNB006 36,400 13.3 17.0 1050 840 35,800 4.06 9.5 22,600 3.00
226ANA048****B FV4CN(B,F)005 47,000 12.5 16.0 1400 1120 47,000 3.68 9.0 29,200 2.72
226ANA060****C FV4CNB006 56,500 12.5 16.0 1750 1400 58,000 3.72 9.0 36,000 2.76
* AHRI = Air Conditioning, Heating & Refrigeration Institute
Ratings are net values reflecting the effects of circulating fan heat. Supplemental electric heat is not included. Ratings are based on:
Cooling Standard: 80_F(27_C) db 67_F(19_C) wb indoor entering air temperature and 95_F(35_ C) db air entering outdoor unit.
High---Temp Heating Standard: 70_F(21_C) db indoor entering air temperature and 47_F(8_C) db 43° F (6_C) wb air entering outdoor unit.
Low--- Temp Heating Standard: 70_F(21_C) db indoor entering air temperature and 17_F ( --- 8 _C) db 15° F ( ---9_C) wb air entering outdoor unit.
COP — Coefficient of Performance
EER — Energy Efficiency Ratio
HSPF — Heating Seasonal Performance Factor
SEER — Seasonal Energy Efficiency Ratio
226A
To Next Page
Loading...
