8. Press the DAY button to change between weekday and
weekend programming. To set the weekend schedule,
repeat steps 2 through 6, entering values in boxes 13 though
24.
9. Press END/HOLD to exit the programming mode.
MODIFYING YOUR WEEKLY COMFORT SCHEDULE:
If you choose to change any of your weekly schedule, press
PROGRAM at any time. You will enter the programming schedule
at the present day, period, and mode. You are ready to set the new
starting time for the present period. One press of the TIME/TEMP
button and you are ready to set the new temperature. Press
HOLD/END and you are finished.
OVERRIDING YOUR COMFORT SCHEDULE:
There are two ways to override your comfort schedule:
Method 1 — Manual Operation By pressing the HOLD/END
button to turn on the HOLD icon, the thermostat will maintain the
current temperature settings and ignore the comfort schedule for an
indefinite period of time. The word HOLD will appear in the
display. Press the HOLD/END button a second time and the
thermostat will return the temperature settings to the programmed
comfort schedule. Pressing HOLD/END will not alter your pro-
grammed comfort schedule.
Method 2 — Temporary Override
At the first press of the UP or DOWN button, the current
temperature setting will appear on the display. Pressing the UP or
DOWN button again will temporarily change the set point as
needed. At the next programmed time, the programmed comfort
schedule will resume.
TABLE 1—PROGRAMMING TABLE
ENERGY STAR
FACTORY DEFAULT VALUES
NEW COMFORT SCHEDULE
PERIOD TIME COOL HEAT
MoTuWe
ThFr
TIME
COOL HEAT
SaSu
TIME
COOL HEAT
MORNING 6:00 A.M. 78 68 1) 2) 3) 13) 14) 15)
DAY 8:00 A.M. 85 60 4) 5) 6) 16) 17) 18)
EVE 5:00 P.M. 78 68 7) 8) 9) 19) 20) 21)
NIGHT 10:00 P.M. 82 60 10) 11) 12) 22) 23) 24)
—2—
To Next Page
Loading...
Need help?
General
