Need help?Do you have a question about the Bryston 2B and is the answer not in the manual?
General| Power Output (4 ohms) | 100W per channel |
|---|---|
| Signal to Noise Ratio | >100dB |
| Input Impedance | 50k ohms |
| Power Output | 60W per channel |
| Frequency Response | 20Hz - 20kHz |
| Type | Stereo Amplifier |
| Total Harmonic Distortion | < 0.01 % from 20 Hz to 20 kHz at rated power |
| Input Sensitivity | 1.0V for full output |
| Damping Factor | >200 |
To Next Page
