1 Introduction
Thank you very much for using our products.
You are kindly requested, upon delivery of the product, to check that the delivered product is exactly
what you have ordered and it has no damage caused by transport or the like. lf there is any damage,
defect, or missing parts, please do not hesitate to contact with us.
1.1 Scope and definitions
This manual provides installation, operation and maintenance instructions for the BSV10, BSV16,
BSV24, BSV30, BSV40, BSV60, BSV90 rotary vacuum pumps. You must use your pump as specified in
this manual. Read this manual before you install and operate pump.
You are requested to install and operate the product in compliance with the laws and regulations
relating to the safety, e.g. Fire Defense Law, Electric wiring regulation and so on in the country and
region you use the product. Operators shall need to attend related training and have special
knowledge, skill and title regarding the electricity, machinery, cargo, vacuum and so on.
Important safety information is highlighted as WARNING and CAUTION instructions; you must obey
these instructions. The use of WRANING and CAUTION is defined below.
WARNING
Warnings are given where failure to observe the instruction could result in injury or
death to people.
CAUTION
Cautions are given where failure to observe the instruction could result in damage to the equipment,
associated equipment and process.
The units used throughout this manual conform to the SI international system of units of measurement.
The following symbol is on the pump.
Warning - refer to accompanying documentation.
Warning – risk of electric shock.
Warning – hot surfaces.
To Next Page
Loading...