This equipment has been tested and found to comply with the
Cf
following European Standards for Electromagnetic Compatibility.
Emission Specification
EN55013 1990
(Associated equipment)
Immunity Specification
EN50082/1
1992
Mains Disturbance
EN61000/3/2 1995
(RF
Immunity,
Fast
Transients and ESD)
For continued compliance ensure
that
all input and output cables are wired
with cable screen connected to pin
I
of the
XLR.
The input
XLR
pin
1
on
BSS
equipment
is
generally connected to chassis via
a
capacitor to prevent
ground
loops
whilst ensuring
good
emc compatibility.
To Next Page
Loading...
