BT 2011 - Multi-Base Operation; Operating with more than one base station

29
• Press the UP and DOWN arrows
until one of these words are
highlighted:
– Einstellingen
– Reglages
– Impostazion
– Ajuste
– Instellingen
– Programgôes
• Press
OK.
• Press the
UP and DOWN arrows
until one of these words are
highlighted:
– Lakale Einst
– Reglages Combiné
– Impostaz. Telef
– Ajuste Local
– Program. local
– Lokale. Instell.
• Press
OK.
• Press the
UP and DOWN arrows
until one of the following words
appear highlighted.
– Sprache
– Langue
– Lingua
– Idioma
– Taal
• Press
OK.
• Press the
UP and DOWN arrows
until one of the following words
appear highlighted.
– Inglês
– Engels
– Inglés
– Inglese
– Anglais
– Englisch
• Press
OK. The display should
now be back in English.
To change the language of the
display
You can have the display in English,
French, German, Italian, Spanish,
Portuguese or Dutch. The default
setting is English.
• Press the
MENU button.
• Press the
DOWN button to highlight
SETTINGS.
• Press the
OK button.
• Press the
DOWN button to display
HANDSET SETTINGS.
• Press the
OK button.
• Press the
DOWN button to display
LANGUAGE.
• Press the
OK button.
• Press the
UP or DOWN button to
highlight the language you require.
• Press the
OK button to confirm.
When the Baby Alarm is switched
on, the handset will not ring.
Incoming calls are displayed on the
handset’s screen.
Place the phone 1-2 metres away
from the baby. Make sure they cannot
get hold of the handset.
All warning beeps should be switched
off before using the Baby Alarm, see
page 23.
▼
▲
RED
OK
If you accidentally set the wrong
language
• Press the MENU button until you
exit the menu completely.
• Press the
MENU button again.