13
SETTING UP
Synergy 3100 user guide ~ 5th Edition ~ 26th September ’02 ~ 4457
Additionally, if you have
purchased the Synergy 3100
Twin:
1. Connect the power supply to the
charger.
Plug the power adaptor into the mains
power socket on the underside of the
charger.
The item code for the power supply
used with the charger is 003313.
Plug the adaptor into the mains power
supply and switch on.
2. Install the rechargeable batteries in
the handset.
3. Charge the handset batteries for at
least 16 hours.
Your Synergy 3000 additional handset
comes pre-registered to the main base
station as SYNERGY HS2. This will be
shown on the display.
Your Synergy 3100 Twin
is now ready for use.
Note
The charger must be plugged into the
mains power socket at all times.
Customer Helpline
If you have any difficulties setting up
your Synergy 3100 please call the
Helpline on 08706 058 047.
6 Attach the belt clip (optional)
Fit the belt clip onto the back of the
handset if required.
Slot
Your Synergy 3100
is now ready for use.
To Next Page
Loading...
Need help?
General
