Date and time
Providing you have subscribed to your network’s Caller Display
service, the date and time is set automatically for all handsets
when you receive your first call.
The date and time is recorded with each answering machine
message you receive.
If you do not have a Caller Display service you can set the date
and time manually.
Set date and time manually
1. Press
Menu
and scroll or to
Clock & Alarm
then
press
Select
.
2.
Date & Time
is highlighted. Press
Select
.
3. Enter the date using the format DD/MM/YY e.g. 09 06 07 for
9th June 2007. Enter the time, and you can select 12 or 24
hour time format, see page 37. Press
Save
.
4. Press or
Back
until you return to standby.
Your BT Aqua is ready for use.
Getting started 9
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
To Next Page
Loading...
Need help?
General
