BIG Button +_Issue 2_Edition 1_1.10.03
19
Overwriting the 1571 code stored in the middle
memory button will allow you to store a number
of your own choice. To do this, follow the ‘STORE’
instructions below.
To store numbers in the memory, use the STORE
button. This is located under the memory label
which is underneath the handset. Push the plastic
cover and label to the left to reveal the STORE
button and instructions.
Lift up the handset.
Push label to the left. Press the STORE button.
Press the One-Touch memory button under which
you wish to store the number.
Enter the number you wish to store.
Press the STORE button again.
The phone number is now stored. Replace the
handset.
Note
You can store a phone number under each
of these buttons and dial the number by pressing
just the one button.
To Next Page
Loading...
Need help?
General
