BT BIG Button + User Manual

1. Drill two holes (diameter 8mm) for the screws vertically
apart. Insert the wall plugs provided (if required).
2. Drive the screws into the wall, leaving about 5mm free
on which to hang the phone.
3. Press the phone line cable into the groove on the base
of the phone, so that the phone lies flat against the
wall.
WALL
WALL PLUG
SCREW
102 mm
BIG Button +_Issue 2_Edition 1_1.10.03
32

BT BIG Button + Specifications

General

Type	Corded Telephone
Big Buttons	Yes
Hearing Aid Compatible	Yes
Ringer Volume Control	Yes
Visual Ring Indicator	Yes
Handset volume control	Yes
Power source	Mains Powered