Time and date
You will need to set the correct time and date so they
can be displayed correctly on the display.
If you subscribe to a Caller Display service, the time and
date will be set automatically on receipt of your first
incoming call.
Your BT Decor 1200 uses the 24 hour clock.
1. Press .
Ringer Volume
is displayed.
2. Press to display
Set Time & Date
, press to select.
3. The first digit of the time flashes. Use the keypad to
enter the time, using 2 digits for the hour and 2 digits
for the minutes, press to confirm.
4. The current date setting is displayed with the first digit
flashing. Use the keypad to enter the date using 2 digits
for the day and 2 digits for the month, press to
confirm.
Saved
is displayed.
5. Press to return to standby.
19Settings menu
The default time setting is 12.01.
The default date setting is 01/01.
BT Decor 1200 – Issue 1 – Edition 3 – 22.11.05 – 6899
To Next Page
Loading...
