1. Revolve the handset catch to keep the handset in place
when wall mounted.
2. Remove the base plinth by turning the plinth lock switch
on the underside of the phone to the ‘unlock’ position
and unclip.
3. Drill 2 holes with a 5mm drill for the screws provided,
using the template on the back page.
4. Insert the wall plugs provided and then insert a screw
into each hole. Leave a gap between the head of the
screw and the wall (approx. 9mm).
5. Position the product onto the screws.
6. Drop down to secure into place.
BT Decor 1200 – Issue 1 – Edition 3 – 22.11.05 – 6899
Wall mounting
27
1 2
IMPORTANT
Before you wall mount, please
check that:
• the wall can support the weight
of the phone
• you are not drilling into any
hidden wiring
• the telephone line cord will reach
the telephone socket
BT are not responsible for any
damage/injury caused while
attempting to wall mount
your phone.
To Next Page
Loading...
