17
If you experience any problems, please visit www.bt.com/producthelp
Ringer tone
There are 3 ringer tones to choose from. The default setting is
Ringer tone 1.
1. Press the
button. BT services is displayed.
2. Press
to scroll to Ringer Tones and press .
3. Press
or to change the ringer tone. On each press the
level is shown on the display and you will hear an example ring.
4. When you hear and see the ringer tone you want, press
to confirm.
Set the display time and date
The date will be shown on the display when in standby as dd/mm.
The default time format is 24 hour but you can change this to 12
hour, see below for instructions. (Please note, you should set the
time/date in the 24 hour format first before changing to the 12
hour format if required).
The default settings are 12:00 (pm) 01/01/11 (dd/mm/yy).
1. Press the
button. BT services is displayed.
2. Press
to scroll to Set Time and Date and press .
3. The first digit of the time flashes. Use the keypad to enter the
time, using 2 digits for the hour and 2 digits for the minutes
and press
to confirm.
4. The current date is displayed with the first digit flashing. Use
the keypad to enter the date using 2 digits for the day, 2 for
the month and 2 for the year and press
to confirm.
Set the time format (12 or 24 hour)
1. Press the button. BT services is displayed.
2. Press
or to scroll to Time Format and press .
3. Press
or to select either 12 hour or 24 hour and
press
. Saved is displayed.
The default is 24 hour.
To Next Page
Loading...
