BT Decor 2200 - Handsfree Operation; Making Calls in Handsfree Mode; Answering Calls in Handsfree Mode; Switching to Handsfree During Call

8
If you experience any problems, please visit www.bt.com/producthelp
There are 5 loudspeaker volumes.
You cannot change the volume of the
handset earpiece.
Handsfree
Handsfree mode lets you talk to your caller without holding the
handset. It also allows other people in the room to listen to your
conversation over the loudspeaker. The green LED on the button
will illuminate when handsfree mode is in use and the
icon will
be displayed on the screen.
Make a call in handsfree mode
1. Press the button and then enter the telephone number
to be dialled.
Answer a call in handsfree mode
1. When the phone rings, press the button to answer the call.
Switch to handsfree mode during a call
1. During a call, press the button and replace the handset
on the base.
2. To switch back to using the handset, simply pick the handset up.
Adjust the handsfree volume
Use the buttons to increase or decrease the
loudspeaker volume.
Last number redial
The redial memory holds the last telephone number dialled
(up to 32 digits).
View the last number dialled
1. Press the button. The number will be shown on the
display. If the last 6 digits match a number stored in the
directory, the name of the entry will be displayed as well.