BT Decor 2600 - BT Call Blocking: Using the Block Button; Block Button Functions

If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Using the phone 19
• Answer Phone – All calls not in your Contacts or Allowed list are sent straight
to the Answer Phone including those on your Blocked list.
To change to Announce or Answer phone:
1. In idle mode, press
.
2. Scroll to Blocking mode, press OK and then scroll and select the mode you
want to use and press OK.
Switch BT Call Blocking on/off
When BT Call Blocking is set to On, it is On for whichever mode you’re
using (e.g. Announce mode). If you turn Call Blocking Off, all calls will be
allowed through, even if they are already on your blocked list.
1. In idle mode, press
.
2. On/Off is displayed. Press OK and then scroll and select either On or Off
and press OK.
When you receive a call with BT Call Blocking switched on you will hear
the message, You have a call from XXX. To accept this call press 1. To
always accept their calls, press 2. To block their calls, press 3. To send this
call to the answer phone, press 4. To listen to the options again, press
*
’.