Using the phone
If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
22
2. Scroll to Block numbers and press OK.
3. Scroll to Area codes and press OK.
4. On first use, you will see No codes stored. Add code? Select Yes.
5. Add the area code (eg 01473) and press Save.
Set Outgoing calls control
Outgoing call control lets you “Allow”or “Bar” certain types of calls from
being made from your Decor 2600, e.g Premium Rate and Mobiles. (The
default setting is that ALL outgoing calls are allowed)
1. Select Menu and scroll to Outgoing Call Control and press OK.
2. On first use you will need to set up an access PIN, read on-screen info,
press OK.
3. Select Set PIN when prompted and follow on screen instructions to set
4-digit access PIN.
4. Mobile calls is highlighted. You can scroll through the list to
International calls, Premium rate calls or All dialled calls and press OK
on the setting you want to change.
4. Scroll between Allowed and Barred and then press OK.
If ‘All dialled calls’ is set to Barred, this will take priority over the other
settings except emergency numbers 999 and 112 which can
still be dialled. If set to Allowed, the status of the other settings will
manage which calls can be made.
To Next Page
Loading...
