BT Digital Cordless Telephone User Manual

10
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
2. Insert the wall plugs provided into the holes and then insert
the 2 screws, one into each hole. Leave a gap between the
head of the screw and the wall (approx 3mm).
3. Thread the power cable from the charger through the hole in
the bracket and thread the cable into the cable groove on the
underside. Secure the charger onto the bracket by screwing
the 3 screws supplied into the underside of the bracket.
4. Fix the bracket (now with charger attached to it) onto the
screws protruding from the wall, by placing it over the screw
heads then pull it down gently and it should drop down and
secure into place.
Your BT Elements phone is ready for use
Getting started
3
50
8
IMPORTANT
Before you wall mount, please
check that:
• you are not drilling into any hidden
wiring or plumbing
• the mains power adaptor will reach
the plug socket
BT are not responsible for any
damage / injury caused while
attempting to wall mount
your phone.

BT Digital Cordless Telephone Specifications

General

Brand	BT
Model	Digital Cordless Telephone
Category	Cordless Telephone
Language	English