BT Digital Cordless Telephone User Manual

9
Elements – New Style – Edition 4 – 31.08.06 – 7644
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
3. At the charger: Plug the charger power cord into the charger
and the mains power wall socket. Place the handset on the
base to charge for at least 24 hours. The red Charging light
comes on. While the handset is charging, the symbol
scrolls in the display, when the handset is fully charged the
display shows the symbol.
4. After 24 hours, plug one end of the telephone line cord into
your BT Elements base and the other end into the telephone
wall socket.
Wall mounting (optional)
If you wish you can wall mount the handset and charger.
1. Drill two holes in the wall for the 2 screws provided using the
wall mounting bracket as a template.
Getting started
Power adaptor
cable
Telephone line cord
(DO NOT connect to the wall socket until the handset is fully charged)

BT Digital Cordless Telephone Specifications

General

Brand	BT
Model	Digital Cordless Telephone
Category	Cordless Telephone
Language	English