EasyManua.ls Logo

BT Everyday Phone - Quick Start Guide; Initial Setup and Placement

BT Everyday Phone
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
This equipment is not designed for
making emergency telephone calls
when the power fails. Alternative
arrangements should be made for
access to emergency services.
Find
Everyday Phone Single
Digital Cordless Telephone
BT Helpline 0800 218 2182
Use power supply unit item code 066771
ITEM CODE: 090661 S/N: XXXXXXXXXX
British Telecommunications plc. 81 Newgate St, London, EC1A 7AJ
REN 1.0
MADE IN CHINA
Quick set-up guide
Where to put your phone
• Place the base within 3 metres
of a mains power socket and
1.8 metres of a phone socket
so the cables will reach.
• Make sure it’s at least a metre
away from other electrical
appliances to avoid interference.
• Don’t place the phone or
base in a bathroom or other
humid area.
• The product works by sending
radio signals between the
handset and base. The strength
of the signal depends on where
you position the base. Putting it
as high as possible can help give
you the best signal.
1. Plug in
1. Plug the mains power adaptor
into the base, with the cable clipped
in the groove provided.
2. Plug the other end of the power
adaptor into the wall power socket
and switch on.
3. Plug the phone line cord in to the
base, but don’t plug the other end
into the phone wall socket.
Important
• Don’t connect the phone line to
a phone socket until the handset is
fully charged.
• The base station should be plugged
into the power socket all the time.
2
1 3

Related product manuals