22
Freeway [A6] ~ Issue 1 ~ Edition 5 ~ 31st March ’03 – 5023
Note
When channel monitor is ON you will hear a hiss
and a lot of background noise.
To switch channel monitor ON
temporarily:
Press and hold the LIGHT button for at
least 1 second.
You will hear an audible tone and the MON
icon will be shown on the display.
Release the LIGHT button to switch the
channel monitor OFF.
To switch channel monitor ON for longer
periods of time:
Press and hold the LIGHT button for more
than 5 seconds.
You will hear a beep to indicate that the
channel monitor is ON and you will now
hear any background noise.
Release the LIGHT button and then operate
on the channel as usual.
To switch the channel monitor OFF, press
the CHANNEL + or – button, or press the
LIGHT button again for more than 1 second.
To Next Page
Loading...