BT Home Hub 4 - Set-up summary; Plug things in

2
Contents Set-up summary
Set-up summary 2-3
My BT – all your extras in one place 4-5
More about set-up and speed 6
More about wireless 6
Troubleshooting 8-11
Support 12
Plug things in
Unplug any existing broadband kit, then:
1. Connect your new Hub directly to your master phone socket
using the broadband cable (light grey ends) and filter
2. Slide the two parts of the power supply together, connect
power cable and switch on at the socket
3. Press the Power button on the back of the Hub to turn it on.
4. Wait a couple of minutes. Coloured lights will flash while
the Hub tests itself and your broadband. A steady blue light
means your broadband’s ready to use. If the light doesn’t turn
blue, carry on to step 2 and the Hub will help you fix things.
1
to Hub
to Hub
Broadband cable (grey ends)
If you’ve got a double socket like one of these, you don’t
need to use a filter.
Broadband cable (grey ends)
Broadband
DSL
11 2 3 4
Broadband
WAN USB Reset Power Power
On| Off
Gig Ethernet
Power
socket
Power
button
Broadband
DSL socket
BT master
socket
You’ll need a broadband
filter on every phone
socket you use in your
home, including any Sky
box or similar connection.
3732 Hub 4-A ADSL Guide BB 5 [2].indd 2 06/06/2017 08:54