EasyManua.ls Logo

BT Home Monitor VP1000 - Page 64

BT Home Monitor VP1000
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BT Home Monitor ~ 8th Edition ~ 26th March ’03 ~ 5296
Size: 250 x 190 x 44mm
(9
13
/16 x 7
1
/2 x 1
3
/4in)
Weight: 905g (2 lb) excluding batteries
Colour: Stone
MAGNETIC CONTACT
Frequency
(MHz): 868.95
Transmitter’s
ID Code: 24-bit digital word, over 16 million
combinations, pulse width
modulation
Overall Message
Length: 36 bits
Message
Repetition: Repetitive transmission
(once every 3 minutes)
Supervision: Signalling at 15-minute intervals
Response to
Tamper Event: Tamper report every 3 minutes
(until the tamper switch is
restored)
Battery: 3V Lithium Type CR-2 or
equivalent
Battery Life
Expectancy: 2
1
/2 years (for typical use)
Battery
Supervision: Automatic transmission of battery
condition data as part of any
status report
Operating
Temperature: 0°C to 49°C (32°F to 120°F)
Dimensions: 81 x 22 x 23.5mm
Weight: Transmitter 34g (1.2oz)
excluding battery,
Magnet 13g (0.45oz)
MOVEMENT DETECTOR
Maximum
Coverage
Range: 12 x 12m (40x 40ft) / 90°
Pet Tolerance: Animals up to 36 kg (80lb)
Battery: 3V Lithium Type CR-2 or
equivalent
Nominal Battery
Capacity: 750mA
Standby
Current Drain: 0.015mA
Transmit
Current Drain: 20mA (including LED)
Battery Life
Expectancy: 2
1
/2 years (for typical use)
Battery
Supervision: Automatic reporting of battery
status with each alarm and with
periodic supervision message
Alarm Period: 3 seconds
Visual
Indications: LED lights for 3 seconds upon
transmission of alarm and tamper
messages and upon each motion
detection in the walk test mode
LED flashes during the power-up
stabilisation period, or after
pressing tamper switch
LED does not flash upon
transmission of supervision
messages
Wireless
Frequency
(MHz): 868.95
Transmission
Sequence: 3 data bursts at variable intervals
within 3 seconds
Encoding: 24-bit ID, over 16 million possible
combinations
Total Message
Length: 36 bits
Tamper Alert: Reported when a tamper event
occurs and in any subsequent
message, until the tamper switch
is pressed
Supervision
Message: Once every 60 minutes
Height: Up to 2.4 m (8ft)
Installation
Options: Flat surface or corner
RFI Protection: >30 V/m up to 1000 MHz
63
SECTION 8