To Next PageTo Next Page
Need help?Do you have a question about the BT INSPIRE 1500 and is the answer not in the manual?
General| Type | Cordless Telephone |
|---|---|
| Answering Machine | Yes |
| Caller ID | Yes |
| Speakerphone | Yes |
| Handsets | 1 |
| Battery Life | Up to 10 hours talk time, 100 hours standby |
| Call Waiting | Yes |
| Headset Jack | No |
| Phonebook Capacity | 50 |
| Range | Up to 300 meters |
Placement advice for optimal signal strength and interference avoidance.
Step-by-step instructions for initial phone setup and connection.
Detailed explanation of each button's function on the phone handset.
Explanation of the icons and information shown on the handset screen.
How to use soft keys to select options and navigate menus.
Using navigation buttons to scroll through menu options.
Instructions for powering the phone handset on and off.
Guidance on initiating and answering phone calls.
How to adjust the call volume on the handset.
Enabling private conversations during an active call.
Using the loudspeaker for calls without holding the handset.
Accessing and managing the list of recently dialled numbers.
Instructions for saving contacts with names and numbers.
Making calls directly from the phonebook.
Removing contacts from the phonebook.
Assigning unique ringtones to specific contact groups.
Assigning contacts to speed dial buttons for quick access.
Removing contacts from speed dial buttons.
Making calls using pre-programmed speed dial numbers.
Customizing ringtones for different call types.
Adjusting the handset's ringtone volume level.
Choosing the active base station for a registered handset.
Adjusting screen contrast and naming the handset.
Enabling automatic answering of incoming calls.
Restoring handset settings to factory defaults.
Setting ringtones and volume for the base unit.
Managing the system PIN for security and settings.
Manually setting the phone's date and time.
Configuring alarm calls with specific times and ringtones.
Viewing caller information before answering calls.
Accessing detailed information about received calls.
Accessing support and helpdesk services.
Using the service for directory assistance.
Managing call forwarding settings.
Controlling the call waiting notification feature.
Controlling the operation of the answering machine.
Setting up personalized or pre-recorded messages for callers.
Configuring answering machine delay, mode, and recording time.
Leaving voice messages for other users.
Listening to incoming messages as they are recorded.
Clearing all previously recorded messages.
Controlling the answering machine directly from the base.
Accessing messages and settings remotely.
Activating or deactivating remote access for messages.
Steps to activate and register for the SMS service.
Instructions for composing and sending text messages.
Step-by-step guide to sending an SMS.
Accessing and reading incoming text messages.
Managing numbers for sending and receiving texts.
Enabling or disabling notifications for new text messages.
Simple process for adding new handsets to the base.
Making calls between registered handsets.
Setting up multi-party calls.
Troubleshooting steps for when the phone is unresponsive.
Diagnosing and resolving issues with no dial tone.
Steps to fix problems with making or receiving calls.
Troubleshooting why the handset is not ringing.
Resolving issues with a blank handset screen.
Resolving issues where the answering machine fails to record.
Troubleshooting missing caller ID information.
Troubleshooting base unit ringing issues.
Identifying and mitigating interference causing buzzing.
Diagnosing the cause of persistent beeping sounds.
Troubleshooting SMS sending failures.
Resolving issues with sending text messages.
Troubleshooting problems receiving SMS messages.
Procedure for replacing rechargeable handset batteries.
Important safety guidelines for using the phone.
Precautions regarding environmental factors and product placement.
Guidelines for disposing of the product responsibly.
Details of the product warranty and terms.
Statement of compliance with relevant directives.
Compatibility information for switchboard connections.
Using pauses in dialing sequences for switchboards or international calls.
