BT RESPONSE 123 PLUS - Using the answering machine; Answering Machine ON;OFF; Outgoing message; Record Outgoing Message

Response 123 Plus ~ Edition 3 ~ 5.1.01 ~ 3305
12
Using the answering
machine
Your Response 123 Plus comes with a
pre-recorded outgoing message. “Hello.
Your call cannot be taken at the moment,
so please leave your message after the tone”.
You can use this outgoing message or
you may prefer to record your own.
To record your outgoing
message
You can record an outgoing
message of up to 30 seconds
long.
Press and hold down the
OGM
button. Your Response 123 Plus
will announce, “Please speak
after the tone, to end recording
release the button”.
Record your message. Speak
clearly, about 15-30 cm from
the microphone.
To end recording release the
OGM button. Your Response
123 Plus will announce, “Your
outgoing message is” and will
play the message back to you.
To switch the answering
machine ON and OFF
Press the ANSWER ON/OFF
button to turn the answer
functions on or off. You will hear
“Answer on” or “Answer off”.
When on, the message
indicator on the
PLAY button
lights up.
p
PLAY
Answer
on off
To adjust the loudspeaker
volume
Press the button to
increase the volume.
Press the button to
decrease the volume.
Outgoing message
The outgoing message is the message
a caller hears when your Response 123
Plus answers a call.
OGM
OGM