When the Calls Log is full, the oldest call record will automatically be replaced by a new Call.
· Viewing Calls in the Calls Log
Press the s
Review button to view each new call. When you have viewed all the new calls,
‘END OF LIST’ will be displayed.
Press the
t Review button to view the previous call record.
· Call Back from the Calls Log
1. Press the s or t
button to search for the entry you wish to Call Back.
2. Lift up the handset or press ‘Monitor’.
3. Press the ‘CALL BACK’ button.
· Clear Button
1. Press the s or t
button to search for the entry you wish to delete in the Calls Log.
2. Press the ‘Clear’ button twice to delete the Call Record.
3. To delete all the entries in the calls log, press and hold the ‘Clear’ button for
approximately 4 seconds, then release the button. Press the ‘Clear’ button again and all
the entries will be deleted.
· Message Waiting
If a caller has left a voicemail message for you the text ‘NEW MESSAGE’ will appear on the
display and the New / Msg LED will flash.
· Redial/Pause Button
To redial the last number you dialled.
1. Pick up the Handset or press ‘Monitor’.
2. Press the ‘Redial’ button.
· Recall Button
Press the ‘Recall’ button to use services such as Call Waiting and Call Transfer.
Special Message Indications
The following special message indicators show the current status of the product:
NO CALLS The Caller Display log is empty
UNAVAILABLE The call has originated from another network which does not support the
sending of Caller Display information.
WITHHELD The caller has withheld their Caller Display information.
END OF LIST There are no new Calls to be viewed.
X Repeat Call Indicator
Low Battery Indicator
New Call Indicator
To Next Page
Loading...
Need help?
General
