BTECH UV-25X4 - Ex: Programming a Channel Repeater Offset with CTCSS Tone

VISIT!BAOFENGTECH.COM!AND!MIKLOR.COM!FOR!DOWNLOADS!AND!HELP!
33!
!
!
Ex: Programming a Channel Repeater Offset with CTCSS
Tone
EXAMPLE!New!memory!in!Channel!99:!
RX!=!145.000!MHz!
TX!=!145.600!MHz!(This!is!a!(+!.60 0 )!O ffse t)!
TX!CTCSS!tone!123.0!
1. Change!from!Menu!to!Men u!b y!pre ssing!th e![EXIT /AB ]!bu tton .!
2. Set!radio!to!VFO!Mode!!by!pressing![V/M]!!
Channel%number%at%the%right%will%disappear.%
3. Menu%45! [M]! 9!9! [M ]! [EX IT]!! !Deletes!Prior!Data!in!channel!(Ex.!99)!
4. Menu!13! [M]! 123.0! [M]! [EXIT]!! !Selects!desired!TX!encode!tone!%
5. Enter!RX!frequency!(Ex.!145000)%
6. Menu!44! [M]! 9!9! [M ]!Enter!the!desired!channel!(Ex!99)%
Ø [EXIT]! RX!has!been!added%
7. Enter!TX!frequency!(Ex.!145600)%
8. Menu!44! [M]! 9!9! Enter!the!same!channel!(Ex!99)%
Ø [EXIT]! TX!has!been!added%
9. [V/M]!!Return!to!MR!Mode.!Channel!number!will!re-appear.!
! !