Need help?Do you have a question about the BTECH UV-50X3 Series and is the answer not in the manual?
Keys and knobs for changing operating bands and tuning frequencies.
Steps to turn the transceiver on and off using the POWER switch.
Using VOL knob for audio and DIAL knob with SQL key for squelch.
Using B key and DIAL knob to choose bands and tune frequencies.
How to transmit by pressing the PTT key and speaking into the microphone.
Storing frequencies, tones, and power levels into memory channels.
Retrieving stored memory channels and understanding display indicators.
Editing, labeling, copying, and deleting memory channels.
Table of common problems, their causes, and corrective actions for transceiver issues.
Technical details including frequency range, antenna gain, stability, and operating environment.
Technical details for RF power output, modulation type, channel spacing, and emissions.
Technical details for circuit type, intermediate frequencies, sensitivity, selectivity, and AF output.
To Next Page
General
