Why is the call not forwarded to the smartphone from my Bticino Classe 300X Telephone?
Ensure that the Classe 300X monitor turns on when a call arrives. Verify that the user account used to access the App is correctly associated with the Classe 300X. If necessary, either perform the association procedure or have another already associated user send you an invitation.
What to do if it is not possible to associate a smartphone to the Bticino Classe 300X Telephone?
First, ensure that both your smartphone and the Classe 300X are connected to the same Wi-Fi network, and that this network has internet access. Verify that there are no existing associated accounts. If needed, request an invitation using the appropriate function. If a previous resident's account is still linked, delete all accounts, memos, and messages via the Classe 300X menu.
How to fix low audio during calls on a Bticino Telephone?
Check the volume settings in the video internal unit menu. If the issue persists across all video internal units in the system, then check the volume level on the entrance panel, referring to the entrance panel instructions.
What to do if the Bticino Telephone internal unit does not ring or turn on?
Verify that the unit is receiving at least 18V of power. Check the device configuration and ensure the ringtone is enabled.
Why does my Bticino Telephone internal unit ring but not turn on?
Check that jumper2 is correctly placed in the housing and that the voltage is at least 18V. Also, make sure that jumper1 is not inserted if the unit is locally supplied.
To Next Page
General