other functions
removing the swivel wheels from the holders
a. The swivel wheel has a round button, which protrudes through the holder.
The button has 2 sprung lips.
b Squeeze the 2 lips together and remove the
swivel wheel from the holder.
c. Do the same on the other side.
swivel wheels active
a. Push down the swivel locks.
b. The swivel wheels are active.
c. The Bugaboo Cameleon’s manoeuvrability is highest
with this setting.
swivel wheels not active
a. Push up the swivel locks.
b. The swivel wheels are non-active.
c. The Bugaboo Cameleon now moves in a straight line.
adjusting the swivel wheels
The suspension is usually adjusted to the lightest setting.
a. Set the swivel wheels to non-active.
b Pull down the white spring clamp.
c Slide the white spring clamp to one of the 4 positions.
d. Fasten the spring on both swivel wheels in the same
position.
Advice The more upright the springs when the 4 wheels are
on the floor, the more rigid the suspension.
Advice For continued optimum comfort, Bugaboo
recommends adjusting the spring one notch for every
5kg of load (child + baggage in the underseat bag).
WARNING
• ALWAYS put both swivel wheel springs in the
same position. This prevents instability.
To Next Page
Loading...
