Bugaboo Cameleon - Big Wheel and Tyre Management

a
a
b
eng
11
big wheels with pneumatic tyres
The tyres of the 2 big wheels are inflated to the correct pressure(1 bar/15 PSI) at the time of
delivery. The valve attachment is in the plastic bag containing the user guide. If necessary,
use the valve attachment to inflate the tyres with a bicycle pump.
step 3 fitting the big wheels to the axle
a Push the big wheels into the wheel holders at the ends
of the long axle.
b. You will hear a ‘click’ for each wheel. The wheels are
now attached.
other functions
removing the big wheels from the axle
a Squeeze the clamp together that is located on the
inside of a big wheel.
b Remove the wheel from the axle. Also remove the big
wheel on the other side.
Note The big wheels cannot be removed from the axle
if the Bugaboo Cameleon’s parking brake is on.