b. Fit the frame supports on the frame bearers.
c. Hold the frame horizontal.
d Press the frame downwards until you hear a ‘click’ on
both sides. The frame is now attached to the chassis.
WARNINGS
• Check that the frame is attached to the chassis. Pick up the frame. If the frame
releases one or both sides of the chassis, press the frame onto the chassis again
until you hear a ‘click’ on both sides.
other functions
placing the frame in different positions
a. Place the frame on the chassis.
b Simultaneously press in the 2 round, white buttons
at the top of the frame supports.
c Tilt the frame by lifting the top part.
Note Just the seat can be put in 3 frame positions.
The carrycot can only be used horizontally.
To Next Page
Loading...
